I got a HDD dock from startech.com. It works great and does everything I need. The problem is it has the brightest goddamn blue LED I have ever seen. It is so unnecessarily bright. My eyes hurt looking in the same direction as it. What the fuck should I do? Return it? De solder the stupid ass LED? It works great aside from this one issue.
Edit: I opened the thing and drew with sharpie on the LED. It’s bearable to look at now.
You can get LED film off Amazon for like, $7. It blocks those annoying LEDs on tech devices, monitors, wall outlets, kitchen appliances, and my nemesis, smoke detectors with stupidly bright LEDs.
Best $7 you’ll spend this year.
I usually use a little tiny piece of electrical tape, which should work unless the power button is absolutely minuscule. Desoldering it also works, but is more permanent.
This is where black electric tape can be your best friend.
I bought a keyboard from ThinkGeek that had an LED that would hit me right in the eye. A little piece of tape and that keyboard served me well for years.
Tape
My monitor had a bright blue power LED smack in the middle of the lower bezel. I took it apart on day one and brutally ripped out the LED, only then did I ever connect it to my computer.
Blue LEDs are the worst offenders. No need to return it as long as you keep a bit of black tape ready. If you still need it as an indicator, you can use layers of yellowish tape. The one used while painting your walls works great. Masking tape it’s called in English.
No, but I did case mod a computer for this once. My Fractal Node 202 my last computer is in has a very bright white power button LED, too damn bright. Fortunately in this case it’s a standard 5mm through hole LED standing up off the board on its leads a bit, bent to point out the front. So I bent it to point upward. Dimmed it down significantly.
I have marker pens and led dims so…no
Likely not, it seems wasteful if the product is otherwise good in all other important regards. I’d just cover up the LED with tape or paint.
lol, I know this pain. about 20 yrs ago i bought a shiny new pc case and expected the red leds, it had 2 super bright blue leds that were either solid on(power) or flashing(drive activity), this pc was next to my bed pointing across my bed. the entire room was lit by these and hard blue circles were projected on the wall. ended up taping a cardboard strip over them.
I either tape the things with Isolation in dark to see nothing or the Painters-Tape which is yellow and partly lets light through.
But colored isolation band lets the light through a bit too.
Yes but also I’ve just put electrical tape over many an item.
The RGB craze is the worst.
Last pc i built i had 1 hard request, “I don’t want a damn xmas tree in my pc.” girl laughed and the only light is from the heat sync :(
Yeah it sucks that I sleep in the same room as my computer. It’s damn near impossible to find a case without RGB.
Should be possible to just not plug them in.
But I have no idea why they are there in the first place.
Amen. I do love LEDs since their dawn and have a big-ass collection. But on every single stupid computer thing? I don’t wanna pay extra just because my mouse can have stupid rgb-lights. Or my damn RAM. It adds absolutely nothing, costs more and has another part that will go broke.
I hate the rgb-craze…
One my Xbox controller’s light is so bright it could power our solar-panels. I had to put multiple Band-Aids on it 🫤
Depends on the product and how inexpensive it is but generally avoid touch devices or anything with led or lights on them that are not needed because I don’t need a fucking touch display for something a button can do.
I bought a air fryer a week ago and couldn’t find one that had simple dials and buttons. It’s fucking disgusting and it’s so bright too. But hey, I can use it as a night light when I’m getting water I guess
Yes
A sharpie also works.
No, one of my mesh WiFi routers is in my room and too bright at night, I just put tape on it. Problem solved.
Every modern router that I’ve worked with has an option to turn the lights off at night. Does the control panel of your router have that too?
It technically has got that setting, but sometimes I’ll do a weird shift or do something that requires me to sleep when it would otherwise be on. I don’t want it permanently off because if I pick it up and look under I can still see the light if I need to and that’s quicker than changing settings in the app.
The tape works and you can’t see it, so I have no need to do it in software.
